SRX-MA333

Model SRX-MA333 PPM O2 Sensor replaces Analytical Industries Model GPR-12-333 PPM O2 sensor. Current output of this PPM O2 sensor in air is well above 600 uA thus giving a good signal to noise ratio at low PPM O2 levels. Fast response and quick recovery from air to under 10 PPM in 45 minutes. Expected sensor life at ambient temperature and pressure is 18 months. Its proprietary electrolyte formulation enhances sensor performance at extreme ends of recommended operating temperature range. Sensor is designed, developed and manufactured in the USA.

  • AII Model GPR-12-333
  • Fully tested in gas for output, stability, accuracy and response time
Другие промышленные датчики кислорода PPM
SRX-MT22 PPM O2 Sensor – Replaces Teledyne B-2C Part number C06689-B2C, AII PSR-12-223, AMI T-2 and Panametrics OX-1 PPM O2 sensors. This PPM O2 sensor can measure oxygen down to 0.1 PPM level in...
SRX-MT22-XL PPM O2 sensor replaces Teledyne B-2CXL PPM oxygen sensor. Extremely smooth surface of sensing cathode produces excellent signal stability and signal to noise ration. SRX-MT22-XL PPM O2...
SRX-MA333-M PPM Oxygen Sensor replaces AII Model GPR-12-333-M PPM oxygen sensor. Sensor is designed with an integral aluminum housing and screws directly into a sensor housing with M16 thread. It is...
SRX-MA100-M PPM Oxygen Sensor is designed for applications where sensor can be exposed to air frequently during use. The lower limit of analysis is 0-100 PPM but quickly recovers from air to low PPM...
Ваш браузер устарел рекомендуем обновить его до последней версии
или использовать другой более современный.